It is a wear resistant submersible pump and ideal for pumping water and dirty water mixed with soil , solids . etc The pumps are used to pump surface water from building sites , wells , subways or tunnels , for lowering ground water for irrigation , supply of industrial water , etc The water jacket cooled motor with the top discharge protects the motor against overheating even during sip operation The low weight and compact design ensure convenient transport , handling , and installation
1. Power Cable: Ang karaniwang kurdon ay 10m
2. Liquid Temperatura: 104°F(40℃) tuloy-tuloy
3. Motor: B insulation class, proteksyon ng IP68
4.Single Phase:Built in the thermal protector
5.Accessories:Float switch ay magagamit
1. O-ring: Buna-N
2. Pump Houseing:Tensile stell
3. Motor Housing:Aluminium alloy
4.Shaft:AISI 304
5. Dalawang-panig na Mechanical Seal: Buna-N elastomer
Gilid ng motor: Carbon VS Silicon Carbide
Gilid ng bomba: Silicon Carbide VS Silicon Carbide
6. Impeller:PTMG
7. Pump Casing: PTMG
modelo | Boltahe, Dalas | Output Power | Kapasitor | Paghawak ng Solids | Ako / min | 0 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
m³ / h | 0 | 6 | 9 | 12 | 15 | 18 | 21 | 24 | 27 | |||||
HS15-12-1.1 | 220V, 50Hz | 1.1kW | 30μf | 6mm | H(m)) | 16 | 15.5 | 14.8 | 13.8 | 12.8 | 11 | 9 | 6.5 | 4 |
modelo | Isang (mm) | B (mm) | D Naglalabas | Laki ng Packing (mm) | NW |
---|---|---|---|---|---|
HS15-12-1.1 | 210 | 390 | G 1.5"F | 225 260 × × 400 | 20kg |