0086-575-87375906

Categories All

CFWT150/250 SIMPLEX SEWAGE LIFT STATION WITH GRINDER PUMP

dikopo:

Pre-assembled grinding system capable of discharging waste water from multiple fixtures, including the toilet, bathtub, dishwasher, sink, shower, bar sink, laundry sink etc.,It can be installed above the floor, inside a pit.The powerful 1 HP motor for absolute reliability and efficiency that can handle up to 110 gallons per minute from several fixtures.The grinder system is ideal to handle sanitary products that may have been flushed

LINTLHA TSA SEHLOOHO:


• Heavy duty simplex system with 1 HP motors for residential applications.

• Incorporates a grinder system ideal for uncontrolled environments as it is designed ho handle sanitary products.

• Capable of discharging through a 1 1 / 2-inch diameter pipe up to 60 feet vertical

• Smart pump technology allows the discharge to increase up to 110 lilithara ka motsotso

• For installations above and below ground as required in various dikopo.

• The new slicer cutter is constructed from hardened stainless steel, the grinder blade rotates against a stationary, perforated base plate, so that waste is quickly and easily dispersed ho pholletsa the base plate’s holes before being pumped into the 1 1/2-inch discharge mola.



TECHNICAL DATA:


Pump Type —— Grinder Pump, with S.S Grinder Blade

Electrical Ratings ——120 V, 60 Hz, 10 A maximum.

Motor ——One, 1 HP, oil-filled, thermally protected motor.

Maximum Operating Temperature —— 158 degrees F (70 degrees C).

Power Supply Cord —— SJTOW, 3 conductors, 16 AWG, 300 V.

Noise Level ——Less than or equal to 68 dBA (Lp), measured at 3 feet.

Discharge Pipe Diameter ——1-1/2 inches.

Vertical Discharge —— 60 maoto.

Discharge at Maximum Flow ——110 gpm.

Shut-Off Head —— 65 maoto.

Normal Running Time ——Depends on number of connected fixtures.

Number of Inlets —— 4

Method of Activation —— Pressure switch, circuit board.

Minimum Toilet, Shower/Bathtub Base Height —— Li-inch tse 10.

Top Vent Connection —— 1-1/2 inches.

Tank and Cover —— Blue polypropylene, 1/8 inch thick.


Lihlahisoa tsa Parameters

ea mohlala

motlakase

bokgoni ba

teba ka

Weight(No Pump)

CFWT150

200 ~ 240 V,50 / 60 Hz

Li-gallons tsa 39

23.5” X 18.5” X 27.5”

26 liponto

CFWT250

200 ~ 240 V,50 / 60 Hz

Li-gallons tsa 60

35.5” X 18.5” X 27.5”

40 liponto

litekanyo