Motorer

Bruksområder:

KEY FEATURES: • Energy efficient and Premium efficient designs • 1.15 S.F. on Sine Wave, 1.0 S.F. on inverter • Class F insulation • Cast Iron Construction • P-Base mounting flange • 420 Stainless Steel Shaft • Type 21 carbon ceramic mechanical shaft seals. O-rings and Sealed fits in stator housing and end plates • Non-wicking, potted cable cap assembly securely attaches and seals the power leads to the frame. Cable cap design allows for easy removal and reconnection of the power cable. • Drive end oil chamber provides a barrier against moisture ingress into the bearings as well as lubricating the upper seal. Oil chamber is filled prior to shipment. • Moisture probes mounted in oil chamber to detect ingress of moisture. Moisture control relay supplied by customer. • (2) Integral cast in lifting provisions for easy, balanced lifting and mounting of the motor • Deep groove Conrad type ball bearings, Class 3 fit per AFBMA std. 20 • (2) N.C. Thermostats • 404 Corrosion resistant stainless steel nameplate and exterior hardware • 30 foot power & control cables • Neoprene jacketed power and control cables • 2 Year Prorated Warranty from date of Manufa

Forespørsel

Detaljer
Parametere og kurve
dimensjoner
Forespørsel

Vanlige alternativer

• Class H insulation system

• Special paint (Coal tar epoxy paint)

• Inner and outer seals options

• Cable lengths to 100 feet (Longer lengths require approval)

• Shaft materials

• Water Jacket Design (to reduce fram size requirements)

• One size smaller flange and aksel

Modell

140TY, 1-3 HP

180TY,5-7.5HP

210TY,7.5-20HP

250TY,25-50HP

Produktparametere

Frame størrelse	Modell Nei	No.of poler	Outsette (HP)	Vurdert nåværende (A)	Effektivitet			Maktfaktor			Vurdert Hastighet (R / min)	Stirrer Karakteristisk (DOL)


					1 (％）	3 (％）	1 (％）	1 (％）	3 (％）	1 (％）		IS (A)	TS (％）	TM (％）
					1 (％）	3 (％）	1 (％）	1 (％）	3 (％）	1 (％）		IS (A)	TS (％）	TM (％）
140TY	140TY-2P-3HP	2	3	4.5	74	71	64	85	81	83	3460	31	170	250
	140TY-4P-1HP	4	1	2	73	71	68	76	71	60	1760	13.5	340	260
	140TY-4P-1.5HP	4	1.5	2.7	74	72.5	68	78	73	81.5	1745	19	320	250
	140TY-4P-2HP	4	2	3.1	75	73.5	69	80.5	74	62.5	1735	23	350	270
	140TY-4P-3HP	4	3	4.3	77	76.5	73.5	83.5	77.5	66.5	1726	30	310	250
180TY	180TY-2P-7.5HP	2	7.5	10	76	73.5	67.5	92.5	91.5	88	3450	58	270	260
	180TY-4P-5HP	4	5	6.7	80	79	79	84	83	80	1765	47	290	230
	180TY-4P-7.5HP	4	7.5	10	84	83	81	86	81	70.5	1735	63	270	250
210TY	210TY-4P-10HP	4	10	15.5	87	86	84	85	82.5	76	1754	92	270	250
	210TY-4P-15HP	4	15	19.5	88	87	85	88	82	78	1750	135	250	240
	210TY-4P-20HP	4	20	24	89	87	85.5	88	84	80	1750	165	235	210
	210TY-6P-7.5HP	8	7.5	11.5	80	80	78.5	76	69.5	57.5	1143	62	190	205
	210TY-6P-10HP	6	10	15	81	81	78.5	77	71	59	1140	78	180	200
	210TY-6P-15HP	8	15	20.8	85	84.5	82.5	79	73	61.5	1160	112	190	210
	210TY-8P-10HP	8	10	14.8	82.5	82.5	80	76.5	69.5	57	880	72	170	205
250TY	250TY-2P-50HP	2	50	58	88	87.5	86	91.5	90	85	3460	402	220	250
	250TY-4P-50HP	4	50	61	90	90	88.5	85.5	82.5	74	1760	340	200	210
	250TY-8P-20HP	6	20	26.7	86.6	86	84	81	75.5	64.5	1160	140	180	210
	250TY-8P-25HP	6	25	34.1	87	86.5	84.5	79	73	62	1160	185	200	220
	250TY-6P-40HP	6	40	63	88	88	86.5	81	76.5	66	1165	285	170	200

dimensjoner

RAMME	C	H	AH	L	BB	BE	AK	AL	D	AJ	BF	d	NØKKELVEI
RAMME	C	H	AH	L	BB	BE	AK	AL	D	AJ	BF	d	a	b
140TY	22.82	21.26	1.56	15.3		0.75		9.126	11.062	10	0.44	0.875	0.187	0.09
180TY	26.66	24.38	2.28	17.3		0.75		10.63	12.375	11.5	0.56	1.25	0.25	0.12
210TY	32.03	30.47	1.56	24.1	0.25	0.75	13.125	12	15.25	14.12	0.56	1.438	0.375	0.19
250TY	38.93	36.61	2.32	26.65	0.25	0.88	15	14	17	16	0.69	1.75	0.375	0.19