Dukkan Bayanai

Pumps masu matakai da yawa QX


Mainly used for accumulated water discharge of mines and construction sites, and also applicable to remote water delivery, irrigation, fountain and other equipment.The High-head electric submersible pump adopts the three-phase power supply, with small volume and ight weight. If the entire electric pump is required to be submerged in the water, when the pump is started, there is no need of water injection. Such pumps are not restricted by suction stroke, with no need of pump rooms and installation bases, able to be operated at any time, having simple and convenient operation.Adopt the multistage impeller to achieve pressurization, with mechanical seal on the impeller outlet position, own low bearing pressure,avoid the abrasion arisen from mud and sand, and have a long service life.Configure the starting protector. When the electric pumps voltage is too low, under the circumstance of overload or staling. this protectormay automatically cut off the power, so as to play a role of protecting the electric pump.

bayani dalla-dalla

1.Power Cable: Daidaitaccen igiya shine 10m tare da matsa lamba Grommet don rufewa

2. Zazzabi Ruwa: 104°F(40°C) ci gaba

3.Motor: B Class Insulation, Cika Iska, Shigar Cage Squirrel, 

   IP 68 kariya

4.Three Phase: Gina a cikin thermal Overload Protector

5.Kayan Zaɓuɓɓuka: Tsawon igiya

Ƙayyadaddun Sashe

1.O-ring: Buna-N

2.Motor Housing: Cast Iron ASTM A-48, Class 30

3.Seal Plate: Cast Iron ASTM A-48, Class 30

4.Shafi: AISI 420

5.Double-gefe Mechanical hatimi, Buna-N Elastomer,

   300 Series Bakin Hardware

   Gefen Mota: Carbon VS Ceramic 

   Gefen famfo: Silicon Carbide VS Silicon Carbide

6.Impeller: Cast Iron ASTM A-48, Class 30

7.Pump Casing: Cast Iron ASTM A-48, Class 30

8.Paint: Air Dry Enamel

Matakan Samfur




Mitar wutar lantarki

Fitarwa Power

Disch Dia


QX10-64/2-464m10380V / 50Hz4kW2"75kg
QX10-96/3-7.596m10380V / 50Hz7.5kW2"100kg
QX10-128/4-11128m10380V / 50Hz11kW2"140kg