It is a wear resistant submersible pump and ideal for pumping water and dirty water mixed with soil , solids . etc The pumps are used to pump surface water from building sites , wells , subways or tunnels , for lowering ground water for irrigation , supply of industrial water , etc The water jacket cooled motor with the top discharge protects the motor against overheating even during sip operation The low weight and compact design ensure convenient transport , handling , and installation
1. Netzkabel: Das Standardkabel ist 10m
2. Flüssigkeitstemperatur: 104 ° F (40 ℃) kontinuierlich
3. Motor: Isolationsklasse B, IP68-Schutz
4.Single Phase:Built in the thermal protector
5.Accessories:Float switch is available
1. O-Ring: Buna-N
2. Pump Houseing:Tensile stell
3. Motor Housing:Aluminium alloy
4.Shaft:AISI 304
5. Doppelseitige Gleitringdichtung: Buna-N-Elastomere
Motorseite: Carbon VS Silicon Carbide
Pumpenseite: Siliziumkarbid VS Siliziumkarbid
6. Impeller:PTMG
7. Pump Casing: PTMG
Modell | Spannung, Frequenz | Ausgangsleistung | Kondensator | Solids Handling | Ich bin dabei | 0 | 100 | 150 | 200 | 250 | 300 | 350 | 400 |
450 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
m³ / h | 0 | 6 | 9 | 12 | 15 | 18 | 21 | 24 | 27 | |||||
HS15-12-1.1 | 220V , 50Hz | 1.1kW | 30μf | 6mm | Hm) | 16 | 15.5 | 14.8 | 13.8 | 12.8 | 11 | 9 | 6.5 | 4 |
Modell | A (mm) | B (mm) |
D Entladen |
Packungsgröße (mm) | NW |
---|---|---|---|---|---|
HS15-12-1.1 | 210 | 390 | G 1.5 "F | 225 × 260 × 400 | 20kg |