усе раздзелы

шматступенныя помпы QX


Mainly used for accumulated water discharge of mines and construction sites, and also applicable to remote water delivery, irrigation, fountain and other equipment. The High-head electric submersible pump adopts the three-phase power supply, with small volume and ight weight. If the entire electric pump is required to be submerged in the water, when the pump is started, there is no need of water injection. Such pumps are not restricted by suction stroke, with no need of pump rooms and installation bases, able to be operated at any time, having simple and convenient operation. Adopt the multistage impeller to achieve pressurization, with mechanical seal on the impeller outlet position, own low bearing pressure, avoid the abrasion arisen from mud and sand, and have a long service life. Configure the starting protector. When the electric pumps voltage is too low, under the circumstance of overload or staling. this protector may automatically cut off the power, so as to play a role of protecting the electric pump.


1.Power Cable: Standard cord is 10m with Pressure Grommet for sealing

2. Тэмпература вадкасці: 104°F (40°В) бесперапынны

3. Рухавік: B клас ізаляцыі, напоўнены паветрам, індукцыя клеткі вавёркі, 

   Абарона IP 68

4.Three Phase: Built in thermal Overload Protector

5.Optional Equipment: Cord Length

Тэхнічныя характарыстыкі часткі

1.O-кольца: Buna-N

2.Motor Housing: Cast Iron ASTM A-48, Class 30

3.Seal Plate: Cast Iron ASTM A-48, Class 30

4.Шафт: AISI 420

5.Double-sided Mechanical seal, Buna-N Elastomer,

   Нержавеючае абсталяванне серыі 300

   Motor side: Carbon VS Ceramic 

   Збоку помпы: Карбід крэмнію VS Карбід крэмнію

6.Impeller: Cast Iron ASTM A-48, Class 30

7.Pump Casing: Cast Iron ASTM A-48, Class 30

8.Paint: Air Dry Enamel

параметры прадукту




Частата напружання

Выхадная магутнасць

Disch Dia


QX10-64/2-464m10380V / 50Hz4 кВт2"75kg
QX10-96/3-7.596m10380V / 50Hz7.5 кВт2"100kg
QX10-128/4-11128m10380V / 50Hz11 кВт2"140kg