It is a wear resistant submersible pump and ideal for pumping water and dirty water mixed with soil , solids . etc The pumps are used to pump surface water from building sites , wells , subways or tunnels , for lowering ground water for irrigation , supply of industrial water , etc The water jacket cooled motor with the top discharge protects the motor against overheating even during sip operation The low weight and compact design ensure convenient transport , handling , and installation
1. Power Cable: Standard cord is 10m
2. Liquid Temperature: 104°F(40℃) continuous
3. Motor: B insulation class, IP68 protection
4.Single Phase:Built in the thermal protector
5.Accessories:Float switch is available
1. O-ring: Buna-N
2. Pump Houseing:Tensile stell
3. Motor Housing:Aluminium alloy
4.Shaft:AISI 304
5. Double-sided Mechanical Seal: Buna-N elastomers
Motor side: Carbon VS Silicon Carbide
Pump side: Silicon Carbide VS Silicon Carbide
6. Impeller:PTMG
7. Pump Casing: PTMG
Model | Voltage,Frequency | Output Power | Capacitor | Solids Handling | I/min | 0 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
m³/h | 0 | 6 | 9 | 12 | 15 | 18 | 21 | 24 | 27 | |||||
HS15-12-1.1 | 220V,50Hz | 1.1kW | 30μf | 6mm | H(m) | 16 | 15.5 | 14.8 | 13.8 | 12.8 | 11 | 9 | 6.5 | 4 |
Model | A(mm) | B(mm) | D Discharge | Packing Size (mm) | N.W. |
---|---|---|---|---|---|
HS15-12-1.1 | 210 | 390 | G 1.5"F | 225×260×400 | 20kg |