Stainless steel submersible pumps with multi-channel open impeller with grinding device on suction . The grinder system , consisting of a disk bearing concentric holes with a sharp edge and a triangular cutter of high Chrome steel . This series of submersible pumps,particularly suitable to liquids containing long fibres or filaments or solid destroyable bodied even of big sizes , is mostly used for the treatment of biological liquids and waters of civil origin.
1. Power Cable: Standard cord is 10m
2. Liquid Temperature: 104°F(40℃) continuous
3. Motor: B insulation class, IP68 protection
4. Single Phase: Built in thermal protector
5. Accessories: Float switch is available
1. O-ring: Buna-N
2. Motor Housing: AISI 304
3. Shaft: AISI 304 welding shaft
4. Double-sided Mechanical Seal: Buna-N elastomers
Motor side: Carbon VS Silicon Carbide
Pump side: Silicon Carbide VS Silicon Carbide
5. Impeller: AISI 304 welding
6. Pump Casing: AISI 304
7. Shredding ring:AISI 440
8.Grinding ring:AISI 440
Model | Voltage, Frequency | Output Power | Capacitor | I/min | 0 | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
m³/h | 0 | 3 | 6 | 9 | 12 | 15 | 18 | 21 | 24 | ||||
WQ-0.75 B-QG | 220V,50HZ | 0.75kW | 25μf | H(m) | 9 | 7.5 | 5.5 | 3.5 | |||||
WQ-1.1B-QG | 220V,50HZ | 1.1kW | 30μf | H(m) | 11 | 9.5 | 8 | 6 | 3.5 | ||||
WQ-1.5B-QG | 220V,50HZ | 1.5kW | 30μf | H(m) | 13 | 12 | 10 | 8.5 | 6.5 | 4 | 2 | ||
WQ-2.2B-QG | 380V,50HZ | 2.2kW | / | H(m) | 14 | 12.5 | 11.5 | 10 | 8.5 | 7 | 6 | 4 | 2 |
Model | A(mm) | B(mm) | C(mm) | D(mm) | E Discharge | Packing Size (mm) | N.W. |
---|---|---|---|---|---|---|---|
WQ-0.75B-QG | 170 | 195 | 395 | 76 | G 1.5"F | 180×250×430 | 16kg |
WQ-1.1B-QG | 170 | 195 | 395 | 76 | G 1.5"F | 180×250×430 | 17kg |
WQ-1.5B-QG | 190 | 201 | 465 | 100 | G 2"F | 210×250×500 | 20kg |
WQ-2.2B-QG | 190 | 225 | 470 | 110 | G 3"F | 210×250×500 | 23kg |